FIBO COLLECT WIDNES

Ready-Mixed Concrete, Mortar & Screed in Widnes

Need a small load of ready-mixed material without waiting for a full delivery or mixing bag after bag on site? fibo Collect at Beesley & Fildes Widnes lets trade and DIY customers collect freshly batched concrete, mortar and screed from 0.25m³.
Choose from a wide range of concrete grades, masonry mortars, paving mixes and screeds, then collect directly from our Widnes branch at Clare Sawmills. Standard collections do not need to be booked in advance, so you can order what you need and get back to the job without waiting for a delivery slot.
The automated fibo Collect system batches the mix at the point of collection and discharges it into a suitable vehicle, trailer or tub ready for you to take to site.

HOW IT WORKS

BOOK IT. SCAN IT. MIX IT.

No advance booking is required for standard collections. Place your order at the Widnes branch and the team will give you the collection details for your batch.

1. Place your order
Tell the team which material and quantity you need.

2. Get your barcode
You’ll receive the details needed to collect your batch, including the barcode used at the fibo Collect terminal.

3. Position your vehicle or tub
Move a suitable vehicle, trailer or mortar tub into position beneath the conveyor.

4. Scan and collect
Scan the barcode, follow the on-screen instructions and collect your freshly mixed material.

For small loads under 0.8m³, the mixing and pouring process can be completed in under five minutes. Always check that your vehicle or container has enough load capacity before collection.

What can I collect?

Concrete, Mortar & Screed

Choose from a range of freshly batched concrete, mortar and screed mixes for everything from general groundwork and paving to brickwork and floor screeds.

Open the sections below to see the available mixes and typical applications. If you’re unsure which mix you need, speak to the Widnes team before ordering and they’ll help point you in the right direction.

Concrete

Freshly batched concrete for small-load landscaping and groundwork jobs, without the need to mix on site.

Typical applications include fence post holes, kerb bedding, trench fill, shed and bin store bases, light foundations, garden wall footings, patios, paths, steps, ramps and domestic driveways. 

The Widnes range includes 10mm and 20mm aggregate concrete from C6/8 through to C40/50, along with ST1 to ST5 mixes, kerb mix and permeable concrete options. Beesley detailed fibo price list Beesley detailed fibo price list

The correct strength and specification will depend on the job, loading and site conditions, so always confirm the required mix before ordering.

Mortar

Ready-mixed mortar gives you a consistent, workable mix without handling bags, measuring materials or mixing on site.

It is suitable for typical landscaping brickwork such as garden walls, planters, piers, raised beds and edging details. The guide uses Mortar 6:1 for general above-ground landscaping brickwork and bases its brickwork calculations on standard UK bricks with nominal 10mm joints. 

The Widnes range includes M4, M6 and M12 mortar, with AEA and 72-hour options available. Beesley detailed fibo price list

Mortar usage will vary depending on joint thickness, brick type, workmanship and wastage, so quantities should always be treated as a guide.

Screed

Freshly batched screed is available to collect in small quantities, giving you a consistent mix without the time and mess of mixing materials on site.

The current Widnes range includes 4:1 and 6:1 screed mixes, both supplied with an 8-hour retarder. Beesley detailed fibo price list

Choose the screed specification to suit the requirements of the project and always confirm the correct mix, quantity and application before ordering.

JOB GUIDE

Which concrete or Slabmix might suit the job?

• Blinding and low-strength non-structural work: C6/8, C8/10 or ST1, depending on the specification.
• Shed bases, garden wall foundations and general ground foundations: C20/25 is listed for these types of domestic and light commercial jobs.
• Paving and reinforced hardstandings: C25/30 is listed for paving and reinforced hardstandings.
• Driveways, garage floor slabs, retaining walls and reinforced house foundations: C28/35 is listed for these applications.
• Higher-strength agricultural, industrial or structural work: C32/40, C35/45 and C40/50 are available where the project specification calls for higher strength.
• Kerbs: Kerb Mix C20/25 is available, with ST1 also listed for kerb bedding.

Which mortar or screed might suit the job?

• General brickwork and garden walls: M4 / 6:1 mortar.
• External masonry and blockwork: M6 / 4:1 mortar.
• High-strength structural masonry: M12 / 3:1 mortar where specified.
• Paving: Slabmix 4:1 is available in sharp + soft sand and sharp-sand-only versions, plus Mortar for Flags.
• Screed: 4:1 and 6:1 screed mixes are available for floor finishing and general paving/landscaping applications.

WHY FIBO COLLECT?

Small loads without the site mixing

Need less than a full load? fibo Collect is designed for smaller jobs where mixing on site is slow, messy or simply not worth the hassle.

Collect freshly batched concrete, mortar or screed from 0.25m³, taking only what you need for the job. That means less time handling bags, less mixing and clean-up, and less material left over at the end of the day.

Whether you’re working on a patio, path, garden wall, shed base or other small project, fibo Collect gives you a consistent ready-mixed material that you can collect from our Widnes branch and take straight to site.

See How fibo Collect Works in Widnes
See how quick and straightforward it is to collect freshly batched concrete, mortar and screed from fibo Collect at Beesley & Fildes Widnes.
Ready-Mixed Concrete, Mortar & Screed Collection in Action
Watch fibo Collect in action at our Widnes branch, providing convenient small-load collections for trade and DIY projects.
PLAN YOUR COLLECTION

How much do I need?

Concrete volume: measure the length, width and depth of the area in metres, then multiply them together.

Length × width × depth = volume in m³

Example: a 4m × 3m base at 100mm (0.1m) deep is 4 × 3 × 0.1 = 1.2m³.

Mortar coverage: fibo’s Widnes mortar guidance says a 0.25m³ tub lays approximately 385 facing bricks or 379 standard blocks using 10mm joints. A 0.33m³ tub lays approximately 508 facing bricks or 500 standard blocks.

Actual quantities vary with joint size, bed depth, cuts, waste, site levels and workmanship, so check your measurements before ordering.

FREQUENTLY ASKED QUESTIONS

fibo Collect FAQs

What is the minimum collection?
Collections start from 0.25m³.

Do I need to book?
No advance booking is required for standard collection orders. Visit the Widnes branch, place your order and collect during opening hours.

How quickly is it mixed?
A 0.25m³ machine cycle is around four minutes. Beesley & Fildes also states that small loads under 0.8m³ can be mixed and poured in under five minutes. Allow additional time for ordering, positioning and leaving the yard.

What can I collect into?
Use a suitable vehicle, trailer or mortar tub with enough load capacity. Mortar tubs are available to purchase at the branch.

Can I choose 10mm or 20mm aggregate?
Most C-class concrete mixes at Widnes are listed with 10mm or 20mm aggregate options. Choose the aggregate required by the job specification.

Can I collect on Saturday?
Yes. Widnes is open Monday to Friday 7:30am–5:00pm and Saturday 8:00am–12:00pm. Sunday is closed.

Where is the machine?
Beesley & Fildes, Clare Sawmills, Hale Road, Widnes, Cheshire, WA8 8PX.

Why Choose Us
Our team has local expertise with a deep understanding of the construction demands in Widnes and the North West.
Whether it's a residential renovation or a commercial project in the area, we can provide concrete solutions that fit.
Reach out today and enjoy the benefits of ready-mix concrete supply near you.