Standard Multi Width Cavity Closer (100mm - 150mm) 2.44Mtr Ref G247M-150
The G247 range is a single extrusion profile closer which is available to suit a range of cavity widths, including the G247M multi width profiles which are designed to enable the stockist to hold one size which can be easily trimmed to suit a variety of cavity width requirements.
The closers provide an economical solution to cold bridging problems, acting not only as a thermal break to the cavity but also as an effective vertical DPC barrier. The lightweight closers are available in sizes to suit most common cavity widths and are simple to install, requiring no special tools, the lengths can be easily cut with a hand saw.
The G247M multi width closers suit standard cavity widths between 50-100mm and 100-150mm in a single product, the grooved back profile of the insulation can be cut to the desired width.
The cavity closer is non-load bearing and should not be used as replacement for traditional methods of fixing window and door frames to the masonry.
Double flanged profile from a single extrusion
Insulation providing GWP rating of less than 5
Available in varying cavity widths
Multi Width versions available from 50-100mm and 100-150mm