• sika-sikalevel-deep-fill-floor-levelling-compound-25kg-bag-ref-sklevdeep25
  • Sikalevel Deep Fill Floor Levelling Compound 25kg Bag Ref SKLEV245DP25

Sikalevel Deep Fill Floor Levelling Compound 25kg Bag Ref SKLEV245DP25

(0 reviews)
| Write review
Product Code: 5409LEV025

Sika Sikalevel Deep Fill Floor Levelling Compound 25kg Bag Ref SKLEVDEEP25

£17.95 eachex. VAT£21.54 eachinc. VAT

Sikalevel Deep Fill Floor Levelling Compound 25kg Bag Ref SKLEVDEEP25

Sikalevel Deep Fill Concrete Floor Level 25kg Levelling

Bar Code: 5055047206316

Product Option: SKLEVDEEP25

"Replacement product from Sika Everbuild Like for like

Everbuild Deep Fill replaced with Sikalevel Deep Fill

This time in a 25kg bigger bag"

SikaLevel Deep Fill Levelling is a 1-part, thick bed cement based smoothing and resurfacing compound for levelling out very uneven floors and screeds down to a depth of 50mm in one coat.

It is typically used for levelling floors prior to laying ceramic and thermoplastic tiles, lino, wood block flooring or carpet.

When mixed as directed, the compound provides a free flowing/trowelable mix that sets in 3 hours and can be overlaid after only 12 hours at normal temperatures.

NOTE: This product is not suitable for use as a final wearing surface.

Everbuild 750 Benefits:

Enhanced flow properties coupled with long open time giving easy trowelling.

Can be used over underfloor Heating.

Can be overlaid after 12 hours depending on depth.

Up to 50mm in depth in one coat.

Areas for Use:

For levelling uneven subfloors prior to covering/tiling

Limitations:

For internal use only.

NOTE: This product is not suitable for use as a final wearing surface.

Always mix with clean fresh water and always prime floors as directed.

Prime with SikaBond SBR diluted 1:3 with water.

Always apply this product whilst primer coat is still damp.

Never exceed the quantity of water stated. This will dramatically reduce strength and cause cracking.

Do not mix more compound than can be laid in 20 minutes and never try to reconstitute once the product has set.

On substrates where under floor heating is in place, switch of the heating for 24 hours before and after application.

Always consult Datasheet for priming instructions.

"Important Note this is a non returnable product "

while in our care all products are kept in a climate controlled store room.

because this is a reactive product we could not resell the product.

The Product should be stored out of direct sunlight until used.

No reviews yet
Questions & Answers
Ask a Question