Hyload Original 450mm x 20Mtr 315450
Hyload Original is a polymeric DPC material ideal for damp-proofing walls of brick, block, stonework or concrete in both solid and cavity wall constructions. It can be used vertically, horizontally and as a cavity tray. Hyload Original is resistant to compression even under the heaviest of wall loadings, as well as being very easy to handle and install. The product is supported by a complete range of accessories, is compatible with other waterproofing products as well as most commonly used construction materials.
- Over 40 years proven reliability
- Complete Hyload DPC System including preformed cloak units and accessories
- Excellent performance under high compressive loads
- Good flexibility at low temperatures
- Tough and durable
Installation must follow normal good practice for the detailing of damp proof courses, as set out in the relevant clauses of BS 5628: Part 3: 2001 and must be in accordance with the manufacturer's instructions. The following installation practices are essential: DPC must extend through the full thickness of the wall or wall leaf, including pointing, applied rendering or other facing material and project beyond the external face by 5mm. DPCs must be sandwiched between an even bed of wet mortar. Perforations in adjacent courses of brickwork must be completely filled with mortar. All lap joints in the DPC must have 100mm overlap and be completely sealed. Hyload preformed cloak units must be used at stop ends, and all corners and changes in level of cavity trays. When using DPC with boot lintels or similar constructions, it is recommended that the material be installed following the lintel profile.